Description
1. It is applied to all gasoline engines with spark plugs.
2. Inductive design, only need to bind the cable to the spark plug to operate.
3. Timing range is: 9999.9 hours; support speed range: 15300 RPM.
4. LCD screen display.
5. Low-voltage design, built-in battery power supply, safe and reliable; battery life is more than 3 years.
6. Speed mode can be set for use on 2-stroke or 4-stroke engines.
7. The maintenance time reminder function can be set. After the time, the LCD screen flashes to remind you.
8. System data reset function. It can clear all recorded data.
9. The battery is detachable and the product can be used for a long time.
10. Wide range of applications: beach motorcycle chainsaw gasoline engine MTV lawn mower snow.
Operation:
SPEED MODE SETTING: Press and hold the S1 button for 4 seconds, the RPM icon will be displayed, the LCD will display 01 (two times for each rotation of the spark plug); 02 (one for each rotation); 03 (other rotation); 04 (only display Time, does not show the speed per minute).
Once you have found your ideal spark plug ignition method, please release the S1 button, the LCD will flash for 8-10 seconds and return to the total timing mode. The factory value is 02
Maintenance Interval Setting: Press and hold the S2 button for 4 seconds, the number in the right half of the display will flash. And the SERVICE icon will be displayed. Press and hold the S1 button to automatiy increase the flashing digits. After reaching the desired number, release the S1 button. And press and hold the S2 button for 1 second, to increase the next number, repeat the above steps until the interval time is completed, the unit: hour. Release all buttons, after 14-16 seconds, the LCD display will return to the total time mode.
Confirmation of The Maintenance Interval: Press and hold the S1 and S2 buttons simultaneously for 4 seconds, and the 2 digits increase to 09 and return to the total time mode. Indicate the maintenance interval to confirm the start of work. When the engine starts running interval service time to 0, the SERVICE icon is displayed, indicating that the service time is up. In order for the set interval to work, this step must be confirmed.
Set the interval query: Press and hold the S2 button for 4 seconds to query your maintenance interval without any settings. If you want to set a new maintenance interval, repeat steps five and six. That is, you want to query the maintenance interval as long as you hold down the S2 button.
After the Service Time is Up: After the engine is running, if the maintenance interval is up, the SERVICE icon will be displayed to remind the service. Simultaneously press and hold S1 and S2 to make the data from 01-09, the SERVICE icon will be closed, the maintenance interval will be automatiy restored to the original set time, continue to run.
Only display the time: Press and hold the S1 button until the 04 is displayed, release the S1 button, and display the time back to the total time after 8-10 seconds. When the engine is running, the display will only display the time, no display speed, HOURS icon Will flash.
System Reset: Press and hold the S1 key until 05 is displayed, release the S1 key, and display the total time back after 8-10 seconds. Press and hold the S1 and S2 keys at the same time, the data will be reset after 01-09, all data will be cleared, and the speed mode defaults to 02.
List:
Timer*1
