Description

All must be machine pressure, the effect in the picture is hydraulic machine pressure effect, if it is a friend without a machine, please be careful to buy.
The mold material is aluminum alloy, and the back is flat. Need to cooperate with machine pressure, G-clamp and vise are not suitable. Vegetable-tanned cowhide can be directly cold-pressed after the leather is wetted, while non-vegetable-tanned cowhide must be hot-pressed

Suitable for batch leather embossing. It needs to be used with professional machines.
All must be machine pressure, the effect in the picture is 10T hydraulic machine pressure effect, if it is a friend without a machine, please be careful to buy.
If your hydraulic machine is 6T-8T, the final effect of pressing the leather with the mold is that there are details, but not very clear. You can try this: put a layer of about 2 mm of silicone pad under the mold; or After the leather is wet, prolong the pressing time of the hydraulic machine, such as keeping it pressed for ten seconds or tens of seconds, so that the details will be clear after the operation.
Of course, these are just suggestions from our experience, and you need to try and adjust them for your reference. The effect in our picture is to use a 10T hydraulic machine.

It is used to make leather by hand tools, and is not a handicraft or collection. die-casting molding, or steel carved, or manual welding, such as the shape or the grain or structure with a little change, small defect in grain, These are the acceptable ranges that are required by hand tools.Manual tools are consumables, regular use is inevitable to have abrasion, if you mind, please buy carefully!